With its natural green tone, excellent dispersion and reliable performance in cementitious, coating, rubber and plastic systems, iron oxide green is widely used for colored concrete, paving blocks, architectural coatings, epoxy flooring, rubber products, plastic profiles and other industrial applications.

For manufacturers purchasing green pigments in bulk, the key is not simply the appearance of the powder. Consistent color, formulation compatibility, dispersion, outdoor durability and batch-to-batch stability are equally important.

Our iron oxide green pigment is designed to provide a balanced combination of color performance, processing stability and cost efficiency for continuous industrial production.

Green pigments used in industrial products may face very different processing and service conditions.

Concrete and cement products are exposed to highly alkaline environments. Exterior coatings need to withstand sunlight, rain and temperature changes. Rubber and plastic products require good dispersion and stable color during processing.

This is why pigment selection should be based on the complete application system rather than color alone.

1. Stable Color for Consistent Production

Consistent color is especially important for manufacturers producing concrete products, coatings, paving materials and other products in large quantities.

Our iron oxide green pigment is produced under controlled processing conditions to maintain stable color characteristics between production batches.

This helps manufacturers reduce visible color differences between different production lots and maintain a more uniform appearance in finished products.

2. Strong Tinting Strength and Hiding Power

A pigment with good tinting strength can achieve the required color intensity with a relatively low addition level.

The fine and uniform particle characteristics of iron oxide green support effective color development and good covering performance.

For large-volume production, this can help manufacturers optimize pigment dosage and control overall formulation costs.

3. Excellent Alkali Resistance

Cement-based materials create a strongly alkaline environment.

For this reason, pigments used in concrete, mortar, paving blocks and other cementitious products need to maintain their color and stability during and after the curing process.

Iron oxide pigments are widely used in cementitious materials because of their chemical stability and resistance to alkaline environments.

Iron oxide green is therefore suitable for applications such as:

• Concrete pavers
• Colored cement bricks
• Permeable paving blocks
• Cement tiles
• Decorative concrete
• Terrazzo
• Colored mortar

4. Excellent Light and Weather Resistance

Outdoor building materials and coatings may be exposed to UV radiation, rain, humidity and temperature fluctuations for many years.

Inorganic pigments are widely selected for outdoor coloring because of their lightfastness and weather resistance.

This makes iron oxide green suitable for both indoor and outdoor applications where long-term color retention is important.

5. Good Dispersion and System Compatibility

Uniform dispersion is essential for achieving consistent color.

Iron oxide green can be incorporated into a variety of systems, including:

• Water-based coatings
• Solvent-based coatings
• Cementitious systems
• Epoxy flooring systems
• Rubber compounds
• Plastic systems

However, actual dispersion performance depends on the binder, additives, processing equipment and formulation. For demanding applications, laboratory testing with the customer’s final formulation is recommended.

Iron oxide green is a versatile industrial colorant used across several major industries.

1. Concrete & Cement Products

Concrete coloring is one of the most important applications for inorganic pigments.

Iron oxide green can be used in:

• Colored concrete
• Concrete paving blocks
• Permeable paving bricks
• Cement bricks
• Cement roof tiles
• Decorative concrete
• Colored mortar
• Terrazzo
• Artificial stone
• Landscape concrete
• Colored asphalt

Iron oxide pigments are widely used in concrete pavers, roof tiles, mortar and prefabricated concrete products because of their lightfastness and stability in cementitious systems.

Why Green Pigment Is Used in Concrete

Green concrete and paving products can be used to create:

• Landscape pathways
• Garden walkways
• Public plazas
• Residential driveways
• Park landscaping
• Decorative paving
• Architectural concrete surfaces

The final shade depends not only on the pigment but also on the cement color, aggregate, dosage, mixing process and curing conditions. Therefore, a laboratory sample or color trial is recommended before full-scale production.

2. Architectural & Industrial Coatings

Iron oxide green can be incorporated into different coating systems requiring durable green coloration.

Typical applications include:

• Interior wall coatings
• Exterior wall coatings
• Real stone paint
• Texture coatings
• Decorative coatings
• Floor coatings
• Industrial coatings
• Anti-corrosion coatings
• Outdoor architectural coatings

For exterior applications, the combination of color stability and weather resistance is particularly important.

Green architectural coatings can be used on residential buildings, commercial buildings, landscape structures, decorative walls and other outdoor surfaces.

3. Epoxy Flooring & Industrial Flooring

Green is widely used in decorative and industrial flooring systems.

Iron oxide green pigment can be applied in:

• Epoxy flooring
• Epoxy sand flooring
• Cement self-leveling flooring
• Decorative flooring
• Industrial floors
• Wear-resistant flooring
• Garage flooring
• Commercial flooring

The pigment provides stable coloration while allowing manufacturers to develop different green shades according to the formulation and target appearance.

For epoxy and resin systems, pigment dispersion should always be evaluated together with the resin, curing agent and additives used in the customer’s formulation.

4. Rubber & Plastic Products

Iron oxide green can also be used for coloring selected rubber and plastic products.

Typical applications include:

• Rubber floor mats
• Rubber tracks
• Rubber tiles
• Plastic profiles
• PVC products
• EVA products
• Plastic sheets
• General rubber products
• General plastic products
• Color masterbatch applications

For polymer processing, processing temperature and residence time should be controlled according to the specific pigment grade and formulation.

The pigment should be tested in the customer’s actual polymer system before mass production to confirm color stability, dispersion and processing compatibility.

5. Landscaping & Outdoor Decorative Products

Green-colored building materials are increasingly used to integrate artificial structures with natural environments.

Iron oxide green can be used for:

• Garden paving
• Landscape bricks
• Decorative walkways
• Park pathways
• Landscape concrete
• Artificial stone
• Decorative stone
• Outdoor flooring

Compared with surface-applied colorants, integral pigment systems can produce color throughout the cementitious material rather than relying only on a surface coating.

Not every green application requires exactly the same pigment characteristics.

Before placing a bulk order, we recommend confirming the following:

1. Target Color

Please provide:

• A physical color sample
• RAL reference
• Pantone reference
• Existing pigment sample
• Finished product sample
• Target color image

Green can vary significantly in hue, brightness and saturation. Selecting a product only by the name “Iron Oxide Green” may not be sufficient when precise color matching is required.

2. Application System

Tell us whether the pigment will be used for:

Concrete / Cement / Paving / Coating / Epoxy / Rubber / Plastic / Other

Different systems may require different dispersion and performance characteristics.

3. Processing Conditions

For industrial applications, useful information includes:

• Processing temperature
• Mixing equipment
• Mixing time
• Binder type
• Cement type
• Pigment dosage
• Other additives
• Outdoor or indoor exposure

This information helps determine whether the selected pigment is suitable for your formulation.

The selection between inorganic and organic green pigments depends on the application requirements.

For construction and outdoor applications, inorganic pigments are often selected because of their strong chemical stability, lightfastness and weather resistance.

Iron oxide green is particularly suitable when the product needs to maintain stable coloration in demanding environments such as cement-based materials and outdoor construction applications.

For applications requiring extremely bright or highly saturated green shades, other pigment chemistries may be considered.

Therefore, the best pigment should be selected according to the required color, durability, processing conditions and total formulation cost, rather than color intensity alone.

For a small laboratory test, a slight color difference may not appear significant.

For a manufacturer producing thousands of paving blocks, tons of coating or large quantities of plastic products, however, inconsistent pigment color can create visible differences between production batches.

This can result in:

• Customer complaints
• Product rejection
• Reworking
• Additional pigment consumption
• Production delays
• Inconsistent product appearance

For this reason, reliable pigment suppliers should pay close attention to raw materials, production conditions, particle characteristics and batch quality control.

Our supplied product information emphasizes controlled batch color consistency and stable bulk export supply for long-term industrial purchasing.

For regular industrial orders, Iron Oxide Green 5605 is available in:

25 kg woven bags

25 kg paper bags

Jumbo bags upon request

The standard MOQ is 1 metric ton, with support for bulk wholesale orders and mixed-container shipments according to customer requirements.

Customized packaging can also be discussed for long-term customers, including customer information and private-label requirements.

Color expectations can differ between pigment powder and the final product.

For this reason, we recommend testing samples before placing a large order.

A typical evaluation may include:

• Color shade
• Tinting strength
• Dispersion
• Compatibility
• Weather resistance
• Alkali resistance
• Processing performance
• Finished-product appearance

Sample testing is especially important when the pigment will be used in a customer’s existing formulation.

Our product information supports sample testing for color confirmation and formulation compatibility before bulk orders.

What is Iron Oxide Green Pigment?

Iron Oxide Green is a composite inorganic pigment designed for industrial coloring applications. It is commonly used in construction materials, coatings, flooring, rubber and plastic products.

Is Iron Oxide Green suitable for concrete?

Yes. Iron oxide pigments are widely used in cementitious materials because they offer good chemical stability, lightfastness and alkali resistance. Iron oxide green can therefore be used for colored concrete, paving blocks, cement bricks, terrazzo and other cement-based products.

Can Iron Oxide Green be used outdoors?

Yes. Its inorganic pigment characteristics make it suitable for outdoor applications where light and weather resistance are important.

However, actual outdoor durability depends on the complete formulation and exposure conditions, so application testing is recommended.

Can Iron Oxide Green be used in epoxy flooring?

Yes. It can be incorporated into epoxy flooring and epoxy sand flooring systems. Compatibility and dispersion should be tested with the customer’s specific resin system before mass production.

Can it be used in rubber and plastic?

Yes. The product information supports applications in rubber tracks, rubber floor mats, plastic profiles and other rubber and plastic products.

For polymer applications, processing temperature and residence time should be evaluated according to the specific formulation and pigment grade.

What is the MOQ?

The standard MOQ for Iron Oxide Green 5605 is 1 metric ton.

What packaging do you offer?

Standard packaging includes 25 kg woven bags and 25 kg paper bags. Jumbo bags can be discussed for larger-volume orders.

Can you provide samples?

Yes. Samples can be provided for color confirmation, dispersion testing and formulation compatibility before bulk purchasing.

Can you customize the green shade?

Customized color adjustment and packaging solutions can be discussed according to the customer’s application requirements. For accurate color matching, customers are encouraged to provide a physical sample or recognized color reference.